Not all paints can be applied to the ground. Floor paints need to have high strength, wear resistance, aging resistance, impact resistance, and strong adhesion. Only paints with these characteristics can be used on the ground.

It was said that overnight lacquer could be handmade DIY, but the use of luminescent paint is more used on the wall and the floor. Many countries now apply glow in the dark paint to road markings. The luminous effect at night allows drivers and pedestrians to observe road markings better and improve safety.

As mentioned above, the floor paint needs to have the characteristics of high strength, wear resistance, aging resistance, impact resistance, strong adhesion, etc. Similarly, these characteristics are also possessed by ground luminous paint.

So, how do you prove that this luminous paint meets the requirements of the ground? Only one test is required, which is the impact resistance test of the luminous paint film. Next, Glow Technology conducted an impact resistance test for the luminous paint on the ground.

First, prepare an experimental board, place the experimental board on the table, and fix it with tape. Pour the white primer on the experimental board. Using a tool, apply the white primer evenly on the surface of the experimental board. Wait for two after applying evenly. Hour. After the paint film is dry, pour the luminous paint on the experimental board. Use the tool to evenly apply the luminous paint on the surface of the experimental board. After the paint is evenly applied, you cannot test immediately. You need to wait seven days and then perform the impact resistance test after seven days.

paint film impactor