1、Need to prepare before making

Crystal resin

rubber gloves

stirring sticks

mixing cups

glow in the dark pigment powder-We use high-brightness luminous powder produced by Glow Technology, the colors are yellow-green and blue-green, because these two colors have higher brightness.

(I have used about a tablespoon of the glow in the dark powder to 40ml of resin)

kitchen towels

glasses or clear plastic cups of your choice (with at least slightly inverted dome on the bottom)

rubbing alcohol/ soapy water

something to protect your surface when working with resin, I just used a piece of cardboard

2、Clean Your Glass

Clean the bottom of your glass with some rubbing alcohol or just wash them in soapy water to get rid of any grease and dust.

Make sure it’s completely dry before the next step, resin does not like water!

3、Mix Your Resin

Mix your resin according to packet instructions and once it is crystal clear, add the glow in the dark powder and mix thoroughly.

Always make sure the area where you work with resin is well ventilated and also protect your hands and eyes if possible.

4、Pour Resin and Let Dry

Turn your glass upside down and apply the resin mixture. Make sure it doesn’t create a dome, it needs to be flat – unless you want a wobbly glass :)

(Only use the resin on the reverse side of the glass, so that it doesn’t come in contact with food or drink that you will then consume. I would also advise to hand wash separately from other dishes in warm but not hot water)

Let it dry for a couple of days in a warm – room temperature(resin doesn’t like cold either!), dry and dust free environment.

Tip: To make the glass glow even more, use a UV light/ torch and point the light at the dried resin on the bottom of the glass – do this for at least 10-20 seconds. The glass will glow really intensively within seconds!. Or you can just take an advantage of the sun! The longer you leave it ‘charge’ in the sun the longer it will last and glow more intensively.